4
EN
REQUIRED FOR COMPLETION
# Required
Part #
Description
1
SPMAR637T
AR637T 6CH SAFE and AS3X TelemRx
1
SPMX46S50
4000mAh 6S 22.2V Smart G2 50C
1
SPMX56S30
5000mAh 6S 22.2V Smart G2 30C
REQUIRED TOOLS AND ADHESIVES
Description
Balancing stand
7/8-inch box wrench or socket
Felt-tipped pen
Hemostats
Hex wrench set: Metric
Hobby knife with #11 blade
Hook and loop tape
Low-tack tape
Needle nose pliers
Nut driver set: Metric
Paper towels
Phillips screwdriver: #1, #2
Ruler
Tapered reamer
Tie wraps
Threadlock (blue)
BUILDING PRECAUTIONS
During assembly, we recommend resting the parts on a soft surface such as a soft towel to help prevent denting the
sheeting.
REMOVING WRINKLES
The covering of your model may develop wrinkles during shipping and will require the use of a heat gun (HAN100)
and covering glove (HAN150) or covering iron (HAN101) with a sealing iron sock (HAN141) to remove them. Use
caution while working around areas where the colors overlap to prevent separating the colors. Avoid using too much
heat, which could separate the colors. Placing a cool damp cloth on adjacent colors will also help in preventing the
separation of the colors while removing wrinkles.
OPTIONAL FLOAT INSTALLATION
The Ultra Stick PNP fuselage has been prepared for fl oat installation. For additional details, we recommend
downloading the Ultra Stick 10cc manual (HAN2345).
TRANSPORTATION AND STORAGE
Use the three-view drawing at the back of the manual to determine how much room will be required to transport
and store your model. We also recommend the use of wing bags to help protect these surfaces during transport and
storage. The control horns and linkages can cause damage to other surfaces even when placed in storage bags.
Always transport and store the wings so the linkages do not contact other panels to prevent damage.
# Required
Part #
Description
SPMAR8360T
AR8360T 8CH SAFE Telemetry RX
1
SPMR6775
NX6 6 Ch Transmitter Only
1
SPMR8200
NX8 8 Ch DSMX Transmitter Only
1
SPMX40006S30
4000mAh 6S 22.2V Smart 30C; IC5
1
SPMX50006S30
5000mAh 6S 22.2V Smart 30C; IC5
OPTIONAL PARTS
