15
EN
DE
FR
IT
4. Thread the new 130mm x 70mm prop and spinner clock wise onto the
gearbox shaft.
5. Carefully place fuselage parts back and re-tape with
clear tape.
Replacing the Prop Shaft
You may need to replace the prop shaft in the gearbox should it become damaged.
To replace the prop shaft:
1. To remove prop shaft, open the fuselage by cutting through the clear tape on
one side of the fuselage. Also cut the tape across the fuselage in front of the
rudder.
2. Gently grasp the white nylon nut located at the back of the prop shaft to
prevent it from turning.
3. While holding the nylon nut, rotate the spur gear in a clockwise direction. The
prop shaft will thread out of the nut.
4. Gently pull on the spur gear and the prop shaft will slide out of the gearbox.
You may need to cut away a small portion of foam to allow the spur gear to
slide forward out of the gearbox.
5. Remove the propeller from the old prop shaft, then thread the 130mm x
70mm prop and spinner on to the new prop shaft by holding the spur gear
and turning the prop clockwise.
6. Slide the new prop shaft back into the gearbox.
