Horizon Fitness SPF-10II, Manual

Page: 36 / 50

32
3. Preparing and Adjusting the Stitching Head
3-2 Adjusting Stitch Length
3-3 Changing for Work Thickness
Stitch length
adjusting Screw
Wire Guide
Locking Screw
Face Plate
Face Plate
Screw
To equalize both legs of stitch:
(1) Loosen wire guide locking screw.
(2) Turn adjusting screw clockwise to shorten
left leg of stitch; counterclockwise to
lengthen left leg.
(3) Tap bracket down before tightening
screws.
The movement of face plate regulates the
length of stitch legs and the amount of work
compression. To decrease compression
which simultaneously increases the leg
length, raise face plate. To increase com-
pression which simultaneously decreases the
leg length, tap face plate down.
(1) Loosen face plate screws.
(2) Insert screw driver between face plate and
swivel holder bracket to raise or to lower
face plate by tapping at the top of face
plate.
(3) Tighten face plate screw securely.
NOTE:
If face plate is lowered too much when thin
or light sheets are handled, driver end may
cut into work material. Raise face plate
slightly.
Swivel Holder