Horizon Fitness HORIZON CT83, User Manual, Page: 9 / 36

9
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
P A ull LEAD WIRE through RIGHT CONSOLE MAST . After
pulling the
LEAD WIRE
through the mast, the top of the
CONSOLE CABLES should be located at the top of the
mast. Detach and discard
LEAD WIRE
.
Open
B HARDWARE BAG 2
.
Move
C RIGHT LINKAGE ARM
into position and attach to
ELEVATION FRAME .
NOTE: While holding
RIGHT CONSOLE MAST
in the
upright position, tighten PRE-ATTACHED BOLT using
T-wrench to attach
RIGHT LINKAGE ARM
.
Attach
D RIGHT CONSOLE MAST
to
MAIN FRAME
using 1
BOLT (D) , 1 FLAT WASHER (E) and 1 WAVY WASHER (F) .
Lift the E RUNNING DECK until lock latch on side of
treadmill is fully engaged.
Remove
F CONSOLE
from box and place out of the way.
Lower the treadmill
G RUNNING DECK
from the folded
position by stepping on LOCK LATCH on lower right side.
ASSEMBLY STEP 2
ELEVATION FRAME
BOLT (D)
RIGHT LINKAGE ARM
FLAT WASHER (E)
MAIN FRAME
RIGHT CONSOLE MAST
CONSOLE CABLES PRE-ATTACHED BOLT
WAVY WASHER (F)
FOOT LOCK LATCH
WAVY WASHER (F)
29 mm
Qty: 1
BOLT (D)
Qty: 1
FLAT WASHER (E)
27 mm
Qty: 1
HARDWARE BAG 2 CONTENTS :
1
3
2
NOTE: If you have attempted to
move the treadmill from the box
and the machine has sprung
open and cannot be assembled,
refer to the troubleshooting
section in order to restore the
treadmill to its proper position.
*
RIGHT CONSOLE MAST
LEAD WIRES
CONSOLE CABLES