8
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
PRE-ASSEMBLY
ASSEMBLY
STEP 1
FLAT WASHER (B)
20 mm
Qty: 1
WAVY WASHER (F)
29 mm
Qty: 1
BOLT (D)
Qty: 1
BOLT (A)
15 mm
Qty: 1
TEFLON WASHER (C)
18 mm
Qty: 1
FLAT WASHER (E)
27 mm
Qty: 1
HARDWARE BAG 1 CONTENTS :
TEFLON WASHER
(C)
ELEVATION FRAME
FLAT WASHER
(B)
BOLT (A)
WAVY WASHER (F)
FLAT WASHER (E)
LEFT CONSOLE MAST
BOLT (D)
MAIN FRAME
LEFT LINKAGE ARM
WARNING
A
Open
HARDWARE BAG 1
.
B
Cut banding straps. Do not move or lift treadmill from packaging.
C
Move
LEFT LINKAGE ARM
into position. Insert
BOLT (A)
and
FLAT WASHER (B)
into
LEFT
LINKAGE ARM
followed by a
TEFLON WASHER (C)
and attach to
ELEVATION FRAME
.
D
Lift
LEFT CONSOLE MAST
into upright position. Be sure to hold the console mast firmly, as
it will not stay in the upright position on its own.
E
Insert
BOLT (D)
and 1
FLAT WASHER (E)
through
LEFT CONSOLE MAST
followed by a
WAVY WASHER (F)
and attach to
MAIN FRAME.
DO NOT ATTEMPT TO LIFT THE TREADMILL!*
Do not move or lift treadmill
from packaging until specified to do so in the assembly instructions. Failure to do
so may result in injury! Remove plastic wrap from console masts.
NOTE:
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
Summary of Contents for HORIZON CT83
Page 1: ...HORIZON SERIES TREADMILL USER S GUIDE FOR MODEL CT83...
Page 2: ......