Horizon Fitness Elite R4000, Owner'S Manual

Page: 18 / 27

34 35
CUSTOm PROgRAmS
1) Select CUSTOM 1, 2 or 3 program using and press ENTER on the
PROgRAMMINg BUTTON.
2) Set time using and press ENTER on the PROgRAMMINg BUTTON.
3) Set the RESISTANCE profiles using and press ENTER on the PROgRAMMINg BUTTON
after each segment is set to the desired level (repeat until all 15 segments are set).
NOTE: if BACK is pressed on the PROgRAMMINg BUTTON, it will take you back to previous
segment.
4) Press START to begin the program.
NOTE: to reset the memory, press and hold ENTER for 5 seconds.
programming button
BACK ENTER
ZURÜCK EINGABE
SyNCINg bIkE wITH PASSPORT
1) Using the arrow key on the passport remote control to scroll to the setup icon and
press the Select.
2) Follow the on-screen prompt to press and hold the RESISTANCE UP and STOP
buttons on the equipment’s console.
3) Once your sync is success, your bike message bar will change from RF Sync to
Passport Ready.
4) Besides point 3, the message displayed on-screen will notify you if the sync was
completed or failed.
ACCESSINg mEDIA THROUgH ON-SCREEN mENU
1) You can access the Virtual Active content or your personal movies are stored on the
USB drive. Select either the Virtual Active icon or the Media icon using the remote
control.
2) Follow the on-screen prompts to select a video and begin your workout.
3) You will have to Press START on your equipment’s console to begin playing a video.
Note: See Passport Owner’s Manual for more information if purchased separately.
RESISTANCE UP STOP
RESISTANCE UP STOP