Horizon Fitness ELITE E4000, Owner'S Manual, Page: 7 / 21

12 13
SCREW(S)
Φ 5x20mm
Qty:2
BOLT(T)
M5x10 mm
Qty:4
ASSEMBLY Step 7 ASSEMBLY Step 8
A
Open HARDWARE FOR STEP7 .
B
Slide TOP CAP and TOP CAP REAR COVER over
CONSOLE MAST and snap into place.
C
Insert
CONSOLE MAST BOOT
over
TOP CAP
and snap into place.
d
Slide WATER BOTTLE HOLDER over CONSOLE
MAST and attached using 2 SCREWS (S) .
HarDWare BaG 7 CONTENTS :
A
Open HARDWARE FOR STEP 8 .
B
Attach the 5 CONSOLE CABLES to the CONSOLE .
C
Carefully tuck the
CONSOLE CABLES
into the
CONSOLE MAST
into the
CONSOLE MAST
before attaching the
CONSOLE
. Attach
CONSOLE
to
CONSOLE MAST
using
4 BOLTS (T)
.
d
Slide HANDLEBAR BOOTS over upper handlebars.
E
Slide
UPPER HANDLEBARS
onto
LOWER
HANDLEBARS
making sure handlebars are joined
togeter completely. Secure
UPPER HANDLEBARS
to
LOWER HANDLEBARS
using
PRE-INSTALLED
SET SCREWS
.
* Make sure upper handlebars are as far down as
possible. Handlebars can be damaged If not
secured correctly.
F
Slide HANDLEBAR BOOTS down to cover
handlebar attachments.
g
Insert
HANDLEBAR CAPS
into
UPPER
HANDLEBARS
.
HarDWare BaG 8
CONTENTS :
NOTE: Be careful not to pinch any
wires while attaching the console or
handlebars.
WATER BOTTLE HOLDER
CONSOLE MAST
CONSOLE MAST BOOT
TOP CAP REAR COVER
SCREW (S)
TOP CAP
HANDLEBAR CAP
UPPER HANDLEBAR
CONSOLE MAST
CONSOLE CABLES
CONSOLE
BOLT (T)
PRE-INSTALLED SET SCREWS
HANDLEBAR BOOT
LOWER HANDLEBAR