BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BIKE
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
BIKE
OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
BEFORE YOU
BEGIN
ASSEMBL
Y
ASSEMBLY
STEP
YOU’RE FINISHED!
A
料號
004721-00
插件號
Z01
傘頭六角承窩螺絲
005145-A
Z02
B
平墊圈
C
004755-00
Z06
傘頭六角承窩螺絲
E
004382-00
Z07
傘頭十字螺絲
F
005165-00
Z04
弧型墊圈
G
004733-00
Z05
傘頭六角承窩螺絲
BOLTS (J)
CONSOLE MAST
CONSOLE
WATER BOTTLE
HOLDER
CONSOLE WIRES
WIRES
BOLT (J)
12 mm
Qty: 4
BOLT (J)
12 mm
Qty: 4
HARDWARE BAG CONTENTS:
BEFORE YOU BEGIN
CONGRATULATIONS!
on choosing your bike. You’ve taken an important step in developing and
sustaining an exercise program! Your bike is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your bike can improve the quality of your life in so many ways.
HERE ARE jUST A FEW OF THE HEALTH BENEFITS OF ExERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new bike will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your bike in the comfort of your home. This guide provides you with basic information
for using and enjoying your new machine.
LOCATION OF THE BIKE
Place the bike on a level surface. Do not place the bike in any area that will block any vent or air openings.
The bike should not be located in a garage, covered patio, near water or outdoors.
ADJUSTING LEVELERS
Adjust the 4 front and rear levelers so that the bike is level on the floor. Then adjust the center leveler
located under the MAIN FRAME TUBE just so it is snug with the floor.
REAR LEVELERS
CENTER LEVELER
FRONT LEVELERS
Open
HArDWAre BAG 5.
Attach the
CONSOLe WireS
to the
WireS
running through the
CONSOLe mAST
as shown in illustration.
Discard
rOUTiNG Wire
when finished.
Attach the
CONSOLe
to the
CONSOLe mAST
using 4
BOLTS (J)
, as shown in illustration.
NOTe:
Do not pinch wires.
Slide
WATer BOTTLe HOLDer
onto backside of
CONSOLe
.
Connect
AC ADAPTOR
to the
AC ADAPTOR INPUT,
located at front of the main frame. Connect
ADAPTOR
to a
power outlet.
A
B
C
D
ASSEMBLY STEP :
B701_Rev.1.4.indd 12-13
7/29/08 9:21:38 AM
