11
Installation Instructions Kemlan Natural Draft Electronic Ignition Gas Fireplaces
Laying the fire - 850 Ceramic Log
4.
LOCATE LOG NO. 4:
Place it on the left side of the rear log. Charred end facing
inwards.
LOCATE LOG NO. 5.
This log is placed with the thinner edge on the smaller
coal. The charred effect is facing towards the front of the
burner. The whole log is positioned on the burner base.
6.
LOCATE LOG NO. 9:
This log is placed on the rear log in the centre of the
burner. Charred effect facing toward the left of the burner.
The front rests on logs 2 & 3 on the join.
LOCATE LOG NO. 10.
This log is located on the rear log in the position where the
log reduces in height. The charred end is located on the
front log 3 with the charred effect facing toward the right
hand side.
5.
LOCATE LOG NO. 6:
Place this log on the right hand side of the burner on the
rear log in front of the pilot. Charred end facing inwards.
The left hand side of the log is positioned between the
metal uprights on the side of the grate.
LOCATE LOG NO. 7.
The charred effect of the log is positioned on the smaller
coal in the centre of the burner on the right hand side.
LOCATE LOG NO. 8.
This smaller log is placed on the top of log NO. 2 and rests
on the left hand coal in the centre of the burner.
POSITIONING OF ALL LOGS
• It is important to follow the log recommended
positioning.
• Log NO. 6, 10, 9 and 4 must be pinned to rear log
with pins provided.
•
Not doing so can adversely effect the operation of
the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance.
LOGS
