HORITA VLR-100, User Manual, Page: 3 / 19

ii
TABLE OF CONTENTS
GENERAL CHAPTER 1
FEATURES CHAPTER 2
SMPTE TIME CODE CHAPTER 3
3.1 LTC 3-1
3.2 VITC 3-1
3.3 Drop Frame Time Code 3-2
CONNECTING THE VLR-100 CHAPTER 4
4.1 Connecting Power 4-1
4.2 Connecting LTC In and Out 4-1
4.3 Connecting VITC In and Out 4-1
4.4 Connection Diagrams 4-2
Figure 4-1, Basic VLR-100 LTC/VITC Reader Connection 4-2
Figure 4-2, Adding LTC to Source Tape 4-2
Figure 4-3, Adding LTC to Source Tape Using Jamsync 4-3
Figure 4-4, Pre-Stripping Tape with Black-Burst and LTC 4-3
4.5 Serial COMM (VLR-100PC Only) 4-3
OPERATING THE VLR-100 CHAPTER 5
5.1 Time Code Reader Operation 5-1
Selecting the Time Code Source 5-1
LTC Reader Operation 5-1
VITC Reader Operation 5-2
5.2 LTC Generator Operation 5-2
Generator RUN/STOP 5-3
Presetting the Time Code 5-3
Presetting the User Bits 5-4
Ending the Preset Cycle 5-4
Automatic Backtime Preset 5-4
Time Code Jamsync 5-5
User Bit Jamsync 5-5
LTC Recording Levels 5-6
5.3 VITC-to-LTC Translation 5-6
Controlling Direction of LTC Output 5-7
Search Offset 5-7
Ending VITC-to-LTC Translation 5-8
5.4 Controlling the Display 5-8
Display Description 5-9
Figure 5-1, VLR-100 LED Display 5-9
Table 5-1, Discrete LED Descriptions 5-9
MAINTENANCE CHAPTER 6
6.1 Cleaning 6-1
6.2 Service and Troubleshooting 6-1
6.3 Adjustments 6-1
Figure 6-1Jumper Locations 6-1
LTC Output Risetime Jumper 6-2
<1/5 VITC Jumper 6-2
LTCOUT F&R Jumper 6-2
SRH OFFSET Jumper 6-2
FRAMES Jumper 6-3
SPECIFICATIONS CHAPTER 7