Chapter 5 Printer
5.2 Printer setting
68
HORIBA
5.2
Printer setting
Set up the printer using these settings:
・
Printer output baud rate: 2400 bps
・
Bit length: 8 bits
・
Parity: none
Setting for a plain paper printer (CBM-910)
Set DIP switch No. 6 to ON and No. 7 to OFF, and prepare the printer
paper and ink ribbon. Keep the LF key held down. The printer prints only
when the LF key is being pressed.
Setting for a thermal paper printer (DPU-H245AS)
Prepare printer paper and turn ON the power switch with the FEED and
CHARGE switches held down. Set the baud rate of the printer to the
above value, referring to the instruction manual for the printer.
Start the function setting mode of the printer and change it to the above
settings.
