horiba LAQUAact-EC110, Instruction Manual

Page: 50 / 105

Conductivity measurement
34
• Setting the TDS method
TDS is calculated from the measured conductivity value. The available calibration
methods are "Linear": KCl with factor adjustable from 0.4 to 1.0 (default: 0.5), "442":
Myron L 442 non-linear standard curve, "En27888": European environmental standard
non-linear curve, and "NaCl": non-linear salinity curve.
1. Press the key to enter the setting mode.
2. Press the keys to select "TDS" (total dissolved solids setting) and then
press the key.
3. Press the keys to select "TDS TYPE" (TDS method setting) and then press
the key.
key
key
key
key