horiba LAQUA-EC1500, Instruction Manual

Page: 47 / 80

TDS Setup
29
● P2 TDS Setup
Using P2 TDS setup function of the meter, you can:
• Select TDS curve
• Select TDS unit
To set the TDS functions, follow the procedure detailed below:
Prerequisites
Switch on the meter.
• Default TDS curve is linear . You can change the TDS curve to 442 or EN27888 or NaCl.
• For linear curve, default multiplier factor is FACT 0.50. You can set a multiplier factor in
between 0.40 to 1.00.
• Default TDS unit is set as mg/L (g/L). You can change the unit to ppm (ppt).
To return to the measurement mode, press the key.
Note
Tip