![background image](http://html1.mh-extra.com/html/horiba/apda-371/apda-371_operation-manual_2162288070.webp)
Operation Manual HORIBA APDA-371
Particulate Monitor
Date:
April, 2010
______________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________
HORIBA Europe GmbH, Julius-Kronenberg-Str. 9, D-42799 Leichlingen,
: +49(0)2175-8978-0,
: +49(0)2175-8978-50
Page 70
10 ACCESSORIES and PARTS
10.1
Consumables, Replacement Parts, and Accessories
The following parts are available from HORIBA for maintenance, replacement, service, and upgrades. If unsure about a
part you need, please contact the Service department. Some of these parts require technical skills or special
considerations before use or installation.
Description
Part Number
Graphic
Consumables
Filter Tape Roll, Glass Fiber, 60+ days per roll
30mm x 21m
460130
Cotton-Tipped Applicators, nozzle cleaning, 100 pack
Solon #362
995217
Tools
APDA-371 Service Tool Kit: Includes nozzle shims, spring
scales, reel spacer, filter sensor removal tool
BX-308
Leak Test Rubber Nozzle Seal
7440
Membrane Assembly, Replacement, 0.800 mg/cm2
8069
Membrane Assembly, Mid-Range, 0.500 mg/cm2
BX-301
Mass Flow Calibration Kit, 0-20 SLPM
BX-303
Flow Inlet Adapter Kit (Leak Test Valve)
Includes short inlet tube
BX-305
Zero Filter Calibration Kit, with valve
Required for PM2.5 FEM monitoring
Same as BX-305 but with 0.2 micron filter
BX-302
Volumetric Flow Calibration Kit (BGI Delta Cal™)
Flow, Temp, and Pressure Reference Standards
HORIBA recommended flow meter
BX-307