Page 14
Hardware Modification
Instruction Sheet
Reversing Mishandling
Device in Field:
1. Remove shipping clip
2. Make sure mishandling
device is sloped the
same as latch.
3. If not, pull out and
spin180* to the same
direction.
Reversing Mishandling
Device in Factory:
1. Remove shipping clip
2. Pull out mishandling
device to spin to slope
the same as latch.
3. Push mishandling
device in and snap
shipping clip back in.
Shipping Clip for
Mishandling Device
Attaching Top Extension
Pull and rotate latch 180* with
hand and release back into
the lockcase.
A
Hook drive rail of top extension
into gear linkage just above latch.
Screw machine screw through
top extension into screw boss.
Reversing Latch
Angled surfaces on Latch and
Mishandling Device needs to
be in a matching directions
