HOP Air Quality, Installation Manual

Page: 5 / 23

Electrical requirements
There are two possible options available to power the Smart Spot devices. The usual power supply
method is to provide the feed through a ​single phase 230V plug​, where an ​AC Adapter is attached to
adequate the voltage level to the Smart Spot . The AC Adapter is provided in conjunction with the Smart
Spot and the cable length is ​1.2 meters​ long (Figure 1).
!
Optionally and depending on the configuration of the Smart Spot, it is possible to enable Power
Over Ethernet. Ask whether is possible to enable this option into your specific hardware
configuration.
Figure 1. AC Adapter provided with the Smart Spot
> ​ 4 ​ <