25
your Robot is fitted with two 6V 2500mah ni-mH battery packs. The battery packs must be
replaced together. Never mix an old Battery pack with a new Battery pack.
Only use Hoover approved replacement parts for your Robot. Use of parts that are not
approved by Hoover are dangerous and will invalidate your warranty.
Before attempting to change the Batteries, make sure your Robot is turned Off.
REPLACING THE BATTERIES
Turn your Robot over and
place it on a level surface.
Remove the screw from
the Battery cover.
Remove the Battery
cover.
Disconnect the old Battery
by removing the Battery
connector from its socket.
Using the battery leads, lift
the old Battery pack from
the Battery compartment.
when fitting the new
Batteries, strict attention
must be paid to the
polarity of the Battery
pack connector:
Red - positive (+)
Black - negative (-)
Connect the new Battery
to the socket. Carefully
lower the Battery pack into
the Battery compartment.
Refit the Battery cover
and tighten Battery cover
screw.
Yellow
Yellow
Black
Red
Note:
Repeat the steps above to replace the second Battery pack.
The warranty period for the battery is 6 months from the date of purchase.