17
RemOTe COnTROL
Installing / Replacing Batteries
Using your Remote Control
When the Robot is in Standby mode, you can
control it by using the Remote Control buttons:
• Mode buttons: choose the cleaning modes
with the 5 labelled buttons.
• Cursors: drive Robot in four different
directions.
• Pause button: if the Robot is cleaning, this
button will pause it.
Tips:
• Whilst you are navigating the Robot, it cannot
clean.
• If the Robot is paused under another mode,
the Cursors can be used to control the
movements of the Robot.
• Try to point the Remote Control directly at
the Infrared Reciever on the Robot.
• If the Robot is too close to the Virtual Barrier
or Charging Station, the signals may interfere
with the use of the Remote Control.
• 2 x AAA alkaline Batteries are provided for
use in the Remote Control.
• Do not use any other type of Batteries as
they will damage the product.
• Please note + and - when fitting the
Batteries.
• Change the Batteries when you notice the
power is low.
• Remove the Batteries to avoid electrolyte
leakage occurring if the Remote Control is
stored for a long time.
• Do not leave the Remote Control under
strong lights or in direct sunlight as the
Infrared Transmitter may be damaged.
• Refer to the section on ‘Environmental
Considerations’ when disposing of batteries.
BORDER
FOCUS
AUTO
INTENSIVE
HOME
pLEASE NotE
:
Use of the remote control feature whilst the robot
is positioned within a 2m radius of the charging station may result in
intermittent operation
