13
Automatic Cleaning Mode
This is the default cleaning mode for the Robot.
The cycle ends when the Robot needs to charge,
this mode is recommended for normal cleaning.
Route: The Robot travels in a straight line until
it meets an obstacle. Then it will turn to avoid
the obstacle and continue. This status will end
when the Robot detects low Battery and it will
return to the Charging Station.
If the Robot detects a lot of small dust particles,
it will shuffle forwards and backwards.
Edge Cleaning Mode
Route: The Robot travels in a straight line until
it meets an obstacle such as a wall. Then it will
clean along it and around any other obstacles.
This status will end after approximately
25 minutes or when the Robot detects low
Battery. It will return to the Charging Station
automatically.
In this mode, the Robot can reach into corners,
around furniture, under beds and sofas which
may be out of the reach of other cleaners.
Demonstration Cleaning Mode
Route: The Robot will demonstrate its
capabilities with the use of its voice and Remote
Control feature. The Robot will encourage you
to interact.
Press the Menu button to select this mode.
Press the Start/Pause button to engage with
the Robot in this mode.
CLeaninG mODeS
If the Robot detects larger dust particles, it will
take a spiral route.
