Assembling your Carpet Washer
OPERATION
Please read General Safety Information at the beginning before use.
Stand base in
upright position.
Tilt clean water/
solution tank and
line up to carpet
washer. Push
back until it clicks
into place.
Push handle into
main body.
Turn handle lock dial
anti-clockwise to lock
in position.
IMPORTANT:
Carpets should be dry vacuumed thoroughly before washing.
• Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your
carpet/rugs/upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour
removal or bleed with white paper towel or cloth. If your carpet has more than one colour, check all colours.
• Test your carpet/rugs/upholstery – Run the carpet washer over a small hidden area. If no pile distortion
occurs continue cleaning.
• When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot
be moved, place aluminium foil or wax paper under the legs. This will prevent wood finishes from
staining your carpet. Pin up furniture skirts and curtains.
• When using the carpet washer, basic safety precautions should always be observed and don’t
over saturate your carpets.
• Only use Hoover carpet solution. Using other solutions may cause excess foaming and will
invalidate your guarantee.
• The clean water tank should only be filled with warm water (max 40
°
C). Filling the clean water tank with
hot/boiling water will damage your machine and invalidate the guarantee. This is a powerful carpet washer,
before plugging in make sure all controls are turned off also hold carpet washer firmly when staring and
during use.
4
Summary of Contents for HW86-DPM-S
Page 1: ...Version 1 0 Dual Power Max User Guide HW86 DPM S ...
Page 14: ...14 NOTES ...
