MAINTENANCE
11
Lift to remove side belt
cover.
Remove and dispose
of old belt. Clean any
debris from pivot. Place
new belt onto pivot.
Replace side belt cover
and belt guard cover.
Lie carpet washer on
its back exposing brush
bars.
Remove 7 screws from
base.
Replace pivot cover
with 2 screws. Re-fit
upper belt cover.
Use a crosshead
screwdriver. Undo
3 screws and remove
belt guard.
Undo a further 3
screws to the left
off belt guard.
Stand carpet washer
upright. Lift to remove
upper belt cover.
Undo 2 screws and
remove pivot cover.
Lie carpet washer on its back. Slide brush
bars through belt. Place belt on rounded
area of brush bar without bristles. Line up
right side of brush bars with base, push
into place. Lift and push left side of brush
bars until clicked into place.
Replacing the belt
Summary of Contents for HW86-DPM-S
Page 1: ...Version 1 0 Dual Power Max User Guide HW86 DPM S ...
Page 14: ...14 NOTES ...
