background image

FOR HOUSEHOLD USE ONLY.

1. Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit.

2. Keep fingers, hair and loose clothing from moving parts and openings whilst using the vacuum cleaner.

3. This appliance can be used by children aged from 8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision  

or instruction concerning use of the appliance in a safe way and understand the hazards involved.  

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by  

children without supervision.

4. Only Hoover recommend tools should be used with this vacuum cleaner.

5. Don’t use this vacuum cleaner if it has been dropped, damaged or left outdoors.

6. Don’t run over the power cord or use vacuum cleaner if the power cord or plug is damaged.

7. Don’t handle the plug or use the vacuum cleaner with wet hands.

8. Don’t vacuum up any flammable or combustible materials (lighter fluid, petrol, kerosene etc.)  

or use the vacuum cleaner in an area with explosive vapours or liquid.

9. Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning items or use in an area  

where there may be harmful fluids (chlorine, bleach, and ammonia drain cleaner).

10. Don’t attempt to remove blockages with sharp objects as this may cause damage to your vacuum cleaner. 

11. Don’t vacuum up hard or sharp objects such as glass, nails, screws or coins etc.

12. Don’t use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user.

The correct voltage is listed on the ratings label.

13. Turn off all controls on the vacuum cleaner before disconnecting or connecting the power cord.

14. Always keep the power cord away from the brushes whilst using your vacuum cleaner. After use always

wrap the power cord around the cord clips provided.

15. Always make sure both the pre-motor/post motor filters are in place before use.

16. Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories.

17. Keep all openings clear and free from debris as this may affect the airflow/suction.

18. Always replace the fuse in the plug with a 13amp fuse. Always protect the power cable from heated 

surfaces and open flames.

19. Use only CE approved 13amp extension cords, non-approved extension cords may overheat.  

Care should be taken to arrange the extension cord as it can be a trip hazard.

20. Care should be taken to arrange the extension cord as it could be a trip hazard

21. Store the steam mop in a cool, dry area away from children

22. Before storing the steam mop please ensure all water/solutions tanks and hard water filter are thoroughly 

clean and dry

23. Keep the appliance out of reach of children when it is energised or cooling down

PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.

GENERAL SAFETY INFORMATION

3

Summary of Contents for HU86-F2F-M














Reviews: