Before you begin cleaning
Using accessories
OPERATION
5
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing
and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical
socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool
for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry before putting back
into the vacuum machine).
• Filters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Push the on/
off switch to turn
machine on.
Place your foot
gently on the
floorhead and
pull the handle
backwards
to recline the
machine.
Remove hose end
from the floorhead.
If required use
tool connector.
Choose an accessory.*
Push the quick
release cord hook
to one side to
release the power
cord.
Turn the height
adjuster dial
backwards for the
carpet setting.
Turn the height
adjuster dial forwards
for the hard floor
setting, the floorhead
will tilt forward.
Attach accessory
to hose end.
