Changing the belt
MAINTENANCE
9
Switch off your vacuum
cleaner at the main
socket and unplug.
Remove the 4 screws
on the bottom of the
floorhead.
Lift the brush from the
machine starting at the
side without the belt on.
Squeeze the sides
of the floor plate to
release it.
Unhook the belt from
the motor spindle in the
belt compartment. (This
may be easier if you
use a screwdriver to
do this).
Remove the floor plate.
Place the new belt
around the brush bar.
Remove the belt cover.
Feed the other side into
the belt compartment.
Using a screwdriver,
hook the belt onto the
motor spindle.
Reinsert the brushbar. One end of the brushbar
has a square slot, and one end has a circular slot,
ensure that it is put back into the correct position.
