7
REGULAR MAINTENANCE:
Each time the dirt
cup is emptied, the filter should be cleaned.
(Filter will be discolored after use. This will not
affect the filter’s performance.)
For best results, clean after each use.
IMPORTANT
3.1
3.2
dirt Cup: reMOval
dirt Cup & filter: replaCeMent
filter: reMOval
3.1 Grip dirt cup and twist off in direction indicated
on hand vac until unlock symbol is aligned
with mark.
3.2 Pull pre-screen from dirt cup. Empty dirt cup
over trash can to remove debris.
3.3 Pull out filter and brush or wash clean with cold water.
3.4 To remove debris from prescreen, gently tap over trash.
3.5 Replace filter in
pre-screen with micro-
layer side facing out.
3.6 Replace filter and
pre-screen in dirt cup.
3.7 Replace dirt cup by
twisting on in direction
indicated on hand vac
until lock symbol is
aligned with mark.
3. MaintenanCe
WARNING
!
!
Always dry for 24 hours before replacing.
IMPORTANT
!
!
Do not use detergent or hot water to clean.
3.3
3.4
3.6
3.5
3.7
platinuM pOwer head
*
: Cleaning
3.8 Remove Platinum
Power Head Tool from
nozzle and turn over.
Press eject button on
side of tool to release
brushroll and remove.
3.9 Remove red end cap
and clean away hair and
debris.
*Available on selected models.
Do not discard red end cap.
IMPORTANT
tap
3.10 Ensure red end cap
is replaced. Place oppo-
site end onto hexagonal
drive gear and pivot into
place until brushrol
snaps secure.
Summary of Contents for HH87-LX2-ID
Page 18: ...18 7 SERVICE 維修 ...
