Honeywell Process Solutions
Wireless Dual Analog Input Interface Transmitter
Rev. 8
User Manual
I
July 2012
FCC Certification
•
This product is a frequency hopping RF transceiver module for the 900 MHz
ISM band, designed to meet FCC 15.247, and is used in industrial control and
monitoring applications.
•
The antenna is factory installed and
MUST NOT
be removed or modified by the
user.
!
Wireless Dual Analog Input Interface
Transmitter
Models WI551 and WI552
Versions 1.70 or later
Important Information to the User
!
•
Changes or modifications not expressly approved by the manufacturer may void
the user’s authority to operate the equipment.
•
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
•
This device is for mobile and fixed use only (not portable or body-worn). A
separation distance of 20 cm must be maintained at all times between the antenna
and the body of the user and bodies of nearby persons.
•
This device has been designed to operate with an antenna having a maximum
gain of 9 dBd. Antenna having a higher gain is strictly prohibited per regulations
of Industry Canada. The required antenna impedance is 50 Ohms.
•
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than that required for successful communication.
•
The installer of this radio equipment must ensure that the antenna is located or
pointed such that it does not emit RF field in excess of Health Canada limits for
the general population; consult Safety Code 6, obtainable from Health Canada’s
website
www.hc-sc.gc.ca/rpb
.
!
!
Honeywell Process Solutions
1860 West Rose Garden Lane
Phoenix, Arizona, 85027
Copyright 2008 by Honeywell International Inc.
Rev. 8 – July 2012
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and
fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document
are subject to change without notice.
Honeywell
®
and
TotalPlant
®
are U.S. registered trademarks Of Honeywell International Inc.
Other brand or product names are trademarks of their respective owners.
Summary of Contents for XYR 5000 Series
Page 2: ......
