Honeywell Process Solutions
Wireless Dual Analog Input Interface Transmitter
Rev. 8
User Manual
17
July 2012
* Indicates that Menu is Disabled if Wireless Management Toolkit is detected. (See Appendix A)
4.4: Setting a User Password*
Each Transmitter has a password that will lock out undesired users from
making changes to the Transmitter. Any user may still view some of the
Transmitter settings by pressing the ENTER key during the Operations
Sequence and viewing the Read-Only Sequence.
The password is a four-digit password. The factory default is 0000. If you
wish to select a different password, one may be entered via WMT. To do
so, enter the configuration dialog box (See Appendix A). From the con-
figuration dialog box, click on the General tab to bring up the general in-
formation as shown in Figure 4.6.
You can set the Transmitter password for this device by entering a four-
digit number in the Transmitter Password field. Once a password has been
entered, click OK to save and download the password to the Transmitter.
Please note that the password only protects the Transmitter from unauthor-
ized configuration via the NEXT and ENTER buttons. WMT requires a
user login password to gain access to all configuration parameters. How-
ever, user accounts are available and can be set with different access levels
and restrictions (For more information on user accounts see the WMT
User Manual Section 8.4).
Figure 4.5: Menu Map to Password Setting
Figure 4.6: Password Setting Using Wireless
Management Toolkit
4.5: Resetting All Transmitter
Settings
To reset all Transmitter settings to their default state, you must navigate to
the DEFAULT menu option in the CONFIG menu via the keypad.
NOTE
Once at the default menu option, pressing the
ENTER button will display ‘RESET?’ on the
LCD; which asks if you are sure you want to reset
the device to its default configuration. You will
then be prompted with ‘NO’ on the LCD. Pressing
the ENTER button while ‘NO’ is being displayed
will NOT reset the device. Pressing the NEXT
button will display ‘YES’ on the LCD. If you
press the ENTER button while ‘YES’ is being
displayed the device will be reset.
NOTE
Resetting the Transmitter by using the DEFAULT
menu option will not reset the TRIM or OFFSET
values.
Figure 4.7: Menu Map to Reset All Transmitter Settings
Summary of Contents for XYR 5000 Series
Page 2: ......
