10
WEBs HMI Touchscreen Monitor - User Guide
Network
Tap
Network
to configure the network parameters. Available parameter in edit
mode are as follows:
Services
This screen allows the Bridge/Switch Service to be enabled and configured. Using
this service it is possible to connect together the primary WAN (eth0) network
adapter with the secondary network interfaces (eth1 and eth2).
When enabled, the secondary interfaces (eth1 and eth2) share the same IP address
as eth0, and any devices connected to eth1 and eth2 behave as though were
directly connected to eth0.
• Enabled: Off (default)/ On (default).
• Type: SW Bridge (br0) is the default and only option.
• Network Interfaces: eth0, eth1, eth2 - select which Ethernet ports are active.
Parameter
Description
General Settings
Device hostname
Avahi Hostname
Network Interface
Network parameters of the available interfaces
- Name (eth0, eth1 or eth2)
- Label (WAN , LAN1 or LAN2)
- MAC Address
- DHCP (enabled or disabled)
- Address - current IP address
- Netmask - current subnet mask
- Gateway - network gateway IP address
- Bridged - network bridge address
For more details refer to the Configure the Network interface
section.
DNS
DNS Servers
Generally provided from the DHCP servers, but can be modified in
edit mode
Search Domains
Optional domains that will be used in concatenation with the
provided urls.
