WEBs HMI Touchscreen Monitor - User Guide
1
3
Authentication
Enter in edit mode to change the authentication passwords.
Restart
Enables HMI device to be restarted in either of the following modes:
• Config OS: Select to restart the HMI device in special configuration mode. Do
not use this mode unless requested by Technical Support team.
• Main OS: Select to restart the HMI device as it would normally behave on power
up.
Web Browser
This option enables user to configure the behaviour and display options for the
HMI device.
Note:
This menu option is not accessible when viewing System Settings via the ‘tap-tap’
method.
Parameter
Description
On Startup
Defines the behaviour of the HMI panel on power up or following a
restart. This can be set one of the following:
- Open settings page: The login page is displayed. After a successful
login the System Settings screen is displayed.
- Continue where you left: Option not supported.
- Open homepage: The specified Homepage is displayed. The HMI
panel login page does not appear.
Homepage
The primary web page to be displayed when On Startup - Open
Homepage is selected, or when Load Homepage is selected from
the login screen. For example: https://192.168.0.85
Fallback page
If enabled, this allows a secondary webpage to be specified which
will be displayed if the Homepage is unavailable.
Enable toolbar
If enabled, this displays a toolbar along the top edge of the display,
providing access to the login screen or allowing a different web page
to be entered. The following options are also available when the
toolbar is enabled:
- Show toolbar only on error: If enabled, the toolbar will only be
displayed if there is a problem displaying the specified Homepage
or Fallback page.
- Show history buttons: Not supported.
- Show loading controls: Not supported.
Allow downloading
files
Not supported.
Options press-and-
hold time (s)
Sets how long you need to touch and hold the top left corner of the
screen to access the System Settings from the Web Browser.
