69-1353
20
Programming Dial-Out Telephone Number Settings
The Telephone Access Module stores up to three dial-
out telephone numbers. Each telephone number can be
a maximum of 25 digits in length. See Table 4.
•
Telephone number setting one: The homeowner
selects a number where they can be contacted when
away from home (such as office, second home, or
cellular phone number).
•
Telephone number setting two: An alternate contact
when the homeowner cannot be reached (such as
relative, friend or neighbor).
•
Telephone number setting three (HVAC contractor is
providing monitoring service at homeowner’s
request): The HVAC contractor phone number.
IMPORTANT
If these numbers are not programmed, a dial-
out is not initiated on alert.
After you enter the configuration number 9, you will
hear:
•
“Telephone Number Setting Menu.”
•
“To change telephone number one, press 1.”
•
“To change telephone number two, press 2.”
•
“To change telephone number one, press 3.”
•
“To return to the configuration menu, press the
* key”.”
As an example, follow the process to change telephone
number 1:
1.
Press 1.
2.
You will hear, “Telephone number one is not pro-
grammed, enter the telephone number followed
by the # key.”
3.
Enter the telephone number you wish to desig-
nate the Telephone Access Module to dial-out on
an alert condition for telephone setting number
one.
4.
Press the # key.
5.
You will hear, “For Voice, press 1; for Data, press
2.”
The Telephone Access module has the built-in capability
to send data; this is considered a future application. Do
not select option 2. Please fill out and mail your
Registration Card so you are registered to receive
information on this and other future capabilities and
enhancements.
IMPORTANT:
Do not select option 2. You will not receive the
alerts in a voice format so you cannot respond
immediately to an alert.
6.
Press 1.
7.
You will hear, “The alert setting is voice.” “Tele-
phone number one is (telephone number you
entered).
8.
Follow steps 1-7 to program telephone numbers
2 and 3.
9.
When complete, press the * key to return to the
configuration menu.
