69-1353
16
1.
Enter a Low Limit Setting from 40° F (4°C) to
65°F (18°C) in 1°F (1°C) increments. You will
hear, “Your Low Limit Setting is (your low limit set-
ting).”
2.
If this is the Low Limit Setting you want pro-
grammed, press the * key to return to the Config-
uration Menu.
If the Low Limit Setting is not entered correctly, you will
hear, “Invalid Setting.” Follow the menu and these
instructions and enter a new Low Limit Setting.
High Limit Setting
The High Limit Setting is used to activate an alert when
the displayed temperature on the thermostat is higher
than the value you set. The setting range for the High
Limit Setting is 70°F (21°C) to 110°F (43°C) in 1
o
F (1°C)
increments. The factory default setting is 100°F (38°C).
If the thermostat-displayed temperature is higher than
your High Limit Setting and your dial-out alert is active,
the Telephone Access Module dials out and when you
answer the telephone, you will hear, ”Hello, this is a
Honeywell alert message from (your ID here). A High
Limit Alert was observed.”
After entering Configuration Number 3, if your High Limit
Setting is set to the factory setting, you will hear: “The
High Limit Setting is 100°F (38°C).”
If your High Limit Setting is correct and the value you
want, press the * key to return to the Configuration
Menu.
CAUTION
Property Loss Hazard.
Prepare to act promptly; time may be
critical.
Do not assume your designate received and
acted on the active alert.
CAUTION
Property Loss Hazard.
Do not rely only on the Telephone Access
Module to identify potential problems in
your home (like detecting high room
temperatures).
Have someone periodically check your home
while you are away.
You will hear, “To change the High Limit Setting, press
1.” “Enter the High Limit Setting followed by the # key”
1.
Enter a High Limit Setting from 70°F (21°C) to
110°F (43 °C) in 1
o
F (1°C) increments. You will
hear, “Your High Limit Setting is (your High Limit
Setting).”
2.
If this is the High Limit Setting you want pro-
grammed, press the * key to return to the Config-
uration Menu.
If the High Limit setting is not entered correctly, you will
hear, “Invalid Setting.” Follow the menu and these
instructions and enter a new High Limit Setting.
