69-1353
14
CONFIGURING YOUR TELEPHONE
ACCESS MODULE
IMPORTANT:
The Telephone Access Module is designed to
allow remote access to your thermostat set-
tings and information. To access this informa-
tion or make changes, you must connect with
the Telephone Access Module from an out-
side line. If you want to access the Telephone
Access Module locally, you must use a sec-
ond telephone line or a cellular telephone.
Entering the Configuration Menu
IMPORTANT
Your installer may have configured your Tele-
phone Access Module. Before changing the
configuration, discuss the changes with your
installer.
To enter the Configration Menu:
1.
Call the Telephone Access Module.
2.
Enter your Pass Code.
3.
Listen for any active alerts.
4.
Press 99 anytime after the room temperature is
announced.
5.
You will hear, “This is the Configuration Menu;
enter the Configuration Number followed by the #
key.”
6.
See Table 2 for configuration numbers.
Table 2. Configuration Numbers.
Configuration
Number
Description
1
Entering Your Identification (ID)
Number
2
Low Limit Setting
3
High Limit Setting
4
Ring Setting
5
Changing Your Pass Code
6
Assigning Zone Names (if zoning
is installed)
7
Filter Change Setting
8
Alert Dial-out Setting
9
Telephone Numbers Setting
10
Power Outage Setting
11
For Installer Use Only