Honeywell TWM 9000, Supplementary Instructions Manual

Page: 28 / 64

4
OPERATION
28
TWM 9000
www.honeywellprocess.com 34-VF-25-37 iss.2 GLO Jan 18 US
4.5.2 Manufacturer specific parameters of the signal converter for Transducer Block
Parameter
Parameter Parameter
Parameter
Subelement Access Description and settings Initial Value
CALIBRATION_C1_1
CALIBRATION_C1_1 CALIBRATION_C1_1
CALIBRATION_C1_1
Write Alarm Write Alarm Write Alarm Write Alarm
Mix Calibration (Fct. C1.1) -
Zero_Point R/W Zero calibration (manual setting) (Fct. C1.1.1) 0.0
Setting:
-1.0 … 1.0
Size_Entry R Size entry (Fct. D2.4) 2
Setting:
1: value in [m] / 2: table [mm & inch]
Sensor_Size_Tab R/W Size (Fct. C1.1.2) 2000
Setting:
DN2.5 … 3000 [mm] 1/10" … 120"
Sensor_Size_Val R/W Size (Fct. C1.1.2) 0.2
Setting:
0.0025
…
3.000 [m]
GK_Selection GK R/W GK selection (Fct. C1.1.3) 0
Setting:
0: GK & GKL / 1: GK / 2: GKL 3: GKH
GK_Value R/W GK (Fct. C1.1.4) 5.0
Setting:
0.5
…
12.0
GKL_Value R/W GKL (Fct. C1.1.5) 10.5
Setting:
0.5 … 20.0
GKH_Value R/W GKH (Fct. C1.1.6) 5.0
Setting:
0.5 … 12.0
Coil_Resist_Rsp R/W Coil resistance Rsp (Fct. C1.1.7) 60.0
Setting:
10.0 … -220.0
Coil_Temp_Calc R/W Calibration coil temperature (Fct. C1.1.8) 293.15
Setting:
233.15 … 473.15
Density_Fact R/W Density (Fct. C1.1.9) 1000.0
Setting:
100.0 … 5000.0
EF_Electr_Fact R/W Calibrate electrode factor EF (Fct. C1.1.11) (manual setting) 0.003
Num_Electrodes R/W Number of electrodes (Fct. C1.1.12) 0
Field_Frequency R/W Field frequency (Fct. C1.1.13) 7
COLLECTION_ COLLECTION_ COLLECTION_ COLLECTION_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Collection Directory Collection Directory Collection Directory Collection Directory
R A directory that specifies the number, starting indices and DD
Item IDs of the data collections in each transducer within a
Transducer Block.
-
FILTER_C1_2 FILTER_C1_2 FILTER_C1_2 FILTER_C1_2
Write Alarm
Write Alarm Write Alarm
Write Alarm
R/W Filter (Fct. C1.2) -
Limitation_Low R/W Limitation min process input (Fct. C1.2.1) -12.0
Setting:
-100.000
…
-0.001