Using Pictures, Cameras and Videos (cont'd)
14
6. If using Wi-Fi, after all cameras have been added, press
Camera WIFI
to enter the camera wireless settings
information from your router. The screen displays:
“INFO: Camera Wi-Fi setup is applicable only for discovered
cameras”
a) Enter the appropriate wireless information:
•
SSID:
ANY
•
Security Mode:
Disabled, WPA personal, WPA2 personal, or WEP
•
Network Type:
Infrastructure
•
Domain:
USA
•
Channel:
Auto
b) For
Security Mode
,
enter the appropriate information:
•
Tx Key:
1, 2, 3 or 4; WEP Encryption: 64 bit Key (10 Hex Chars) or 128 bit Key (26 Hex Chars), WPA and
WPA2.
•
Authentication:
Open System or Shared Key
•
Passphrase:
then press GENERATE
•
Key:
must consist of 10 hexadecimal characters
c) Press
Apply to All
to set cameras for wireless operation. Press
Save
when done. A pop-up window displays:
“Info XXX.XXX.X.X WIFI Configuration Saved”
d) Remove the LAN cable and reboot the camera. Once rebooted, verify the can be viewed wirelessly via the Tuxedo.
If the camera does not have wireless capability, leave the camera connected to the router via the LAN connection.
e) Press
Camera Settings
to enter Video, Network, Wireless, and Other settings, if required; refer to
Advanced Camera Settings
below.
NOTE:
Cameras must be enrolled to access the Camera Settings screen. If multiple cameras are enrolled,
highlight the desired camera to make changes.
