Installation and Operating Instructions TRS 33xx
19
5.1.2
Individual settings of System-Setup
The examples following use a simplified display presentation in order to accentuate the essential
information.
1.
Language
possible values: German / English
In this parameter, the language is defined that is used in the following. The displays during booting
remain English, independent of the selected language.
With parametrizing via the time recording software, the terminal will be set to the language
defined in the time recording software.
2.
Special options
possible values: No = Standard / Yes = Set parameter
In this parameter, special options deviating from the standard programming can be set using “Yes =
set”. They are described in the following paragraphs.
The default setting
No
skips the options of this submenu and goes directly to the menu
System data
-> Type of communication
.
If the terminal should not work as required, the individual settings of the special options are to
be checked and if neccesary set to
default
.
3.
Display last entry type (for entry/exit) parameter:
possible values:
No
= default / Yes = set parameter
Default:
The terminal can automatically change to a perdefined entry type. This can be defined
in a table of the time recording software.
Y = set:
Deviating from standard the display shows its basic condition till the first valid entry
has been done.
For example, if the first entry is an “Clock in” entry, the entry type “Clock in” will be
displayed as long as another entry type is done, e. g. “Clock out” and so on.