Honeywell STT850 Series User Manual Download Page 66

Page: 66 / 118

Page 56

STT

850 Series HART/DE Option User’s Manual

Revision 4.0

Enter the

History Record Name

using the keypad and tap

. History Name field accepts

alphanumeric characters, underscore, and no other special characters.

Enter the

Device Tag

using the keypad and tap

. Device Tag field accepts alphanumeric

characters, underscore, and no other special characters.

Note

: The device can be identified with

History Record Name

and

Device Tag

in FDM,

once the record is imported in FDM, provided the device is not already present in the FDM
network.

Select the

Format

. The following are the available formats:



FDM



DocuMint

Tap

Save

to save device history record.

If a history record for this device already exists, the following warning message appears.

Tap

Yes

to overwrite the existing name. A overwrite success message appears.

Tap

to return to

Device Home

page.

Summary of Contents for STT850 Series























































































































Search results

Summary of Contents for STT850 Series

Reviews:

Brands by name

Popular brands

Honeywell STT850 Series, User Manual

Search results

Summary of Contents for STT850 Series

Reviews:

Brands by name

Popular brands