MU1H-0635GE51 R1016
52
6.5 Binding underfloor heating controller HCE80 or HCC80
NOTE
A underfloor heating controller can be assigned to a room only if a set
value adjuster or a room sensor has been previously assigned to the
room.
1. Press and hold the Bind button
on the underfloor heating
controller until the LED of the corresponding room (zone) flashes.
2. The LED of the room will flash with a GREEN light.
3. Click on the
Continue
button on the SRC-10.
4. If the binding process is successful, then the yellow LED of the
underfloor heating controller will light up.
5. Room binding is complete.
In order to connect further rooms, repeat the process:
1. Press the Bind button
on the underfloor heating controller
twice (skip flashing red LED).
The green LED of the next room will flash.
Summary of Contents for Smile Room Connect SRC-10
