Honeywell Smile Room Connect SRC-10, Installation Instructions Manual

Page: 14 / 60

MU1H-0635GE51 R1016 14
4 Start-up/Initial setup
NOTE
Before you can configure the SRC-10, you must set up the rooms that
are to be operated in advance in the SCN-10 and activate the
individual room regulator, see chapter 4.1, SCN-10 configuration.
Start-up includes configuring the SCN-10 via a browser (e.g., Internet
Explorer, Chrome, Firefox) on the connected PC/laptop.
Before start-up, please select the following LAN options in the
browser's local network settings:
a. Activate DHCP (automatic address assignment) .
b. Deactivate all proxy server options.
NOTE
Additional costs may be incurred owing to an update of the device
software being installed over the internet. This will depend on the
customer's internet tariff.