Honeywell ScanPal EDA51, User Manual

Page: 32 / 100

22 EDA51 User Guide
• COMMAND
Enter a command that will be executed when the button is pressed, for
example, "start -n packagename/activityname param".
• TEXT
Enter a key combination that will be executed when the button is pressed, for
example, "CTRL,C". See the next section for more information.
7. The remapping is displayed on the Keyremap screen.
Using TEXT Commands
You can use TEXT commands to map multiple keys or a key combination.
• Only lowercase characters are supported, but they must be entered in upper
case. For example, entering "H,E,L,L,O" will produce "hello". "H,e,l,l,o" will produce
"h". To remap to a string with capital letters like "HELLO", use a series of
keycombinations like, "CAPS_LOCK,H,CAPS_LOCK,E,CAPS_LOCK,L,CAPS_
LOCK,L,CAPS_LOCK,O".
• Shifted characters can be remapped in the format SHIFT,<key>. For example,
"SHIFT,1" returns "!", "SHIFT,2" returns "@", etc.
• A space must be defined using the Keyname like "A,SPACE,B".
• Key names separated by comma are considered a string not a key, so
"F,1,E,N,T,E,R" will produce the string "f1enter". "F1,ENTER" will produce the
events as if Function Key 1 and an Enter key have been pressed.
Restore Default Button Action
To restore the default button action:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Keyremap .
3. Tap the clean icon .
4. Choose the remapped button(s) you want restored to the default setting(s).
• Tap the check box next to the button.
OR
• Tap ALL SELECT to choose all the buttons.
5. Tap DELETE .
6. Tap OK to confirm action.