Honeywell PX2 Series, Installation Instructions Manual

Page: 4 / 8

4
Honeywell Sensing and Control
PX2 Series Heavy Duty Presssure Transducers
ISSUE 8
50052336
Table 4. Pressure Ratings
bar kPa MPa psi
Operating
Pressure
Over-
pressure
Burst
Pressure
Operating
Pressure
Over-
pressure
Burst
Pressure
Operating
Pressure
Over-
pressure
Burst
Pressure
Operating
Pressure
Over-
pressure
Burst
Pressure
1 5 8 100 500 800 1 3.1 5.1 15 70 115
1.6 5 8 160 1000 1700 1.6 5.2 8.6 30 150 250
2 10 17 250 1000 1700 2.5 6.9 10.3 50 250 400
2.5 10 17 400 1700 2700 4 6.9 10.3 100 450 750
4 17 27 600 3100 5100 4.6 6.9 10.3 150 450 750
6 31 51 — — — 6 13.8 20.6 200 750 1250
8 31 51 — — — 7 13.8 20.6 250 750 1250
10 31 51 — — — — — — 300 1000 1500
16 52 86 — — — — — — 500 1000 1500
25 69 103 — — — — — — 600 1000 1500
34 69 103 — — — — — — 667 1000 1500
40 69 103 — — — — — — 750 1500 2250
46 69 103 — — — — — — 800 1500 2250
60 138 206 — — — — — — 850 2000 3000
70 138 206 — — — — — — 1000 2000 3000
Table 6. Mechanical Characteristics
Characteristic Parameter
Mechanical shock 100 G per MIL-STD-202F, Method 213B, Cond. F (at 25 °C)
Vibration 20 G sweep, 10 Hz to 2000 Hz (at 25 °C)
Enclosure rating per electrical connector type selection (See Figure 3.)
Wetted materials:
port
substrate
adhesives
electronics
304 stainless steel
alumina ceramic
epoxy
glass, silicon
External materials:
housing
connector:
UL 94 HB (standard)
UL 94 V-0 (optional)
cable jacket
304 stainless steel
PBT 30% GF, black
PBT 30% GF, natural (beige)
TPE
Installation torque per pressure port type (See Figure 4.)
Table 5. Pressure Reference Types
Pressure Reference Description
Absolute
Output is proportional to the difference between applied pressure and a built-in fixed reference to vacuum (zero pres-
sure), where the minimum operating pressure is set to absolute zero pressure (perfect vacuum).
Sealed gage
1
Output is proportional to the difference between applied pressure and a built-in fixed reference to 1 atmA, where the
minimum operating pressure is set to 14.7 psiA (1 atmA).
Vented gage
2
Sensor measures pressure relative to ambient pressure. Output is proportional to the difference between applied pressure
and atmospheric (ambient) pressure, where the minimum operating pressure is set to atmospheric pressure.
Notes:
1. Sealed gage option only available in pressure ranges at or above 100 psi.
2. Vented gage option only available in pressure ranges between 100 psi and 667 psi (not available on cable harness configurations).