Honeywell PRIMUS 1000 Pilot'S Manual Download Page 148

Page: 148 / 334

PRIMUS

1000 Integrated Avionics System

A28--1146--112--00

5-9

Engine Instrument and Crew Alerting System (EICAS)

FAN (N

) SPEED DISPLAY

Analog Scale

-- The fan arc is white. The ranges are listed in

table 5--1.

Color

Lower Limit

(%RPM)

Upper Limit

(%RPM)

White

100.0

Red

100.1

110.0

Analog Scale

Table 5--1

When the analog pointer enters the red range, the normally white

pointer and digital fan readout turn red.

Fan Digital Display

-- Displays digital readout of fan (N

) RPM as

a percent of rotation speed. Display values range from 0 to 110% in

0.1% increments.

NOTE:

The digital readout can indicate as high as 199.9% N

Request Bug

-- The N

request bug is displayed as a solid green

triangle. The bug indicates the throttle position as set by the pilot.

FADEC N

Bug and Digital Target

-- The FADEC N

bug and digital

target are shown as a cyan T--shaped symbol that indicates the

thrust target for the phase of flight, as determined by the FADEC.

FADEC Mode Annunciations

-- The FADEC modes, that are

determined by the throttle position, are annunciated in cyan.

Normally, a single annunciation is supplied at the top of the engine

display. The modes are described in table 5--2.

Summary of Contents for PRIMUS 1000















































































































































































































































































































































Search results

Summary of Contents for PRIMUS 1000

Reviews:

Brands by name

Popular brands

Honeywell PRIMUS 1000, Pilot'S Manual

Search results

Summary of Contents for PRIMUS 1000

Reviews:

Brands by name

Popular brands