Honeywell Performance H4D3PRV2 Software Configuration Manual Download Page 6

Page: 6 / 106

www.honeywell.com/security

6 | Performance Series IP Camera Software Configuration Guide

Warranty and Service

Subject to the terms and conditions listed on the Product warranty, during the warranty period
Honeywell will repair or replace, at its sole option, free of charge, any defective products
returned prepaid.

In the event you have a problem with any Honeywell product, please call Customer Service at
1.800.323.4576 for assistance or to request a

Return Merchandise Authorization (RMA)

number.

Be sure to have the model number, serial number, and the nature of the problem available for
the technical service representative.

Prior authorization must be obtained for all returns, exchanges, or credits.

Items shipped to

Honeywell without a clearly identified Return Merchandise Authorization (RMA) number
may be refused.

Summary of Contents for Performance H4D3PRV2











































































































Search results

Summary of Contents for Performance H4D3PRV2

Reviews:

Related manuals for Performance H4D3PRV2

Brands by name

Popular brands

Honeywell Performance H4D3PRV2, Software Configuration Manual

Search results

Summary of Contents for Performance H4D3PRV2

Reviews:

Related manuals for Performance H4D3PRV2

Brands by name

Popular brands