Honeywell Performance H4D3PRV2, Software Configuration Manual

Page: 60 / 106

www.honeywell.com/security
60 | Performance Series IP Camera Software Configuration Guide
Connection
Figure 5-10 Connection Configuration Interface
Table 5-8 Connection Configurations
Parameter Function
Max Connection This shows the maximum number of network connections for the same
camera. The value ranges from
1 to 20 . The maximum number of
connections is 20 .
TCP Port The default setting is 37777 . You can modify this setting as necessary.
UDP Port The default setting is 37778 . You can modify this setting as necessary.
HTTP Port The default setting is 80 . You can modify this setting as necessary.
RTSP Port The default setting is 554 . The RTSP stream query format is:
Main stream :
rtsp://username:password@ip:port/cam/realmonitor?ch
annel=1&subtype=0
Sub stream :
rtsp://username:password@ip:port/cam/realmonitor?ch
annel=1&subtype=1
You are required to manually enter the following four items: Username,
Password, IP , and Port .
IP : The camera’s IP address.
Port : The default is 554 . You can leave this field blank if you are using
the default value.
Follow standard RTP protocols. When the encode mode is MJPEG , the
maximum supported resolution is 2040×2040.
HTTPs Enable the HTTPs port.
HTTPs Port The default is 443 .