NFW-50X Manual —
P/N LS10129-001NF-E:C 7/25/2018
17
Accessories
Product Description
Important:
Remote modification of FACP programming requires that the panel be enabled for remote download (refer to “FS-Tools
Upload/Download” on page 119). Remote interrogation of panel programming, history logs, detector status, etc., is possible without
enabling the remote download option.
1.6.2 Dress Panel
An optional dress panel, DP-ES-R or DP-ES-B is available for the NFW-50X. The dress panel restricts access to the system wiring while
allowing access to the key panel. A ground strap must be connected between the stud on the inside of the dress panel and the ground stud
in the backbox. The dress panel mounts to the backbox with two (2) #4 screws and washers or two (2) #6 screws.
1.6.3 Trim Ring
Optional Trim Rings (P/N TR-CE-B black, TR-CE red) are available for the FACP backbox. The Trim Rings add 1.5” of wall coverage
around the backbox, concealing hardware and providing a finished appearance for a semi-flush mounted panel.
1.6.4 Battery Box
BB-26
The BB-26 battery box may be used to house up to two 26 AH batteries and the CHG-75 Battery Charger.
NFS-LBB
The NFS-LBB battery box may be used to house two 26 AH batteries, two 60 AH batteries or one 100 AH battery. When the CHG-120
is mounted in the NFS-LBB, two 26 AH or one 60 AH battery may also be housed in the battery box.
1.6.5 Battery Charger
CHG-75 Battery Charger
The CHG-75 is capable of charging up to 75 AH lead-acid batteries with the NFW-50X FACP. The FACP battery charger must be dis-
abled, by removing jumper JP5, when using the CHG-75. The charger and up to 26 AH batteries can be housed in the BB-26 battery box.
Larger batteries and the charger can be housed in the NFS-LBB battery box which can be mounted up to 20 feet away from the control
panel. Refer to the
CHG-75 Manual
for additional information.
CHG-120 Battery Charger
The CHG-120 is capable of charging up to 120 AH lead-acid batteries with the NFW-50X FACP. The FACP battery charger must be dis-
abled, by removing jumper JP5, when using the CHG-120. The batteries and charger can be housed in the NFS-LBB battery box which
can be mounted up to 20 feet away from the control panel. Note that when using the NFS-LBB for housing the charger and batteries
greater than 26AH, multiple NFS-LBBs are required. Refer to the
CHG-120 Manual
for additional information.
1.6.6 FWSG Wireless Gateway
The FWSG Wireless Gateway acts as a bridge between a group of wireless fire devices and a FlashScan SLC loop on the NFW-50X. It is
powered by the SLC loop or by a regulated, external 24VDC UL-listed power supply evaluated for life safety. Available wireless devices
include a photo detector, Acclimate detector, a fixed-temperature heat detector, a rate-of-rise heat detector, a monitor module, and a relay
module. For details about wireless devices, system setup, and operation, see the
SWIFT® Smart Wireless Integrated Fire Technology
Instruction Manual
#LS10036-000NF-E.
NOTE:
The FWSG, as part of the wireless network, has been tested for compliance with the Federal Communications Commission (FCC)
requirements of the United States Government. It has not been evaluated for use outside the USA. Use of this system outside the USA is
subject to local laws and rules to which this product may not conform. It is the sole responsibility of the user to determine if this product may
be legally used outside the USA.