Honeywell Notifier FirstCommand Series, Instruction Manual

Page: 57 / 96

Notifier FirstCommand Series Manual — P/N LS10001-001NF-E:H 1/8/2018 57
Main Menu - Utilities Programming
CMD Input Style
CMD Input Style CMD1 and CMD2 Command Input circuits can be independently programmed to be triggered by a Contact Closure or
by the Reverse Polarity of a Notification Appliance Circuit. When the system is programmed for Mass Notification, CMD1 and CMD2
will be programmed for Reverse Polarity only. See Section 2.5.1 for more information.
3.2.5 Date / Time
Set the local time and date for the panel using the drop-down boxes. Pressing the Refresh button automatically fills these fields with cur-
rent information.
3.2.6 Send to Panel
After completing the desired programming on each page, click the Send to Panel button to save changes to the panel. Selecting the Load
Defaults button will apply default programming to the given page. To then save the applied default settings to the panel, press the Send
to Panel button. The Main Menu button will disregard any programming selections and jump back to the main menu screen.
Changes
made to panel programming will not be applied until complete log out of user programming, with a green indicator at the login screen.
After a successful log out from the programming utility, the panel will reboot and the changes will become effective.
3.3 Main Menu - Utilities
Services for recording messages and software file transfers via USB are located in the Utilities menu. These program utilities require a
valid password for system login. Refer to Section 3.2.1.
Figure 3.9 Tone Duration / CMD Input Types
c
m
d
i
n
p
u
ts
.j
p
g
d
a
te
ti
m
e
.j
p
g
b
u
tt
o
n
s
.j
p
g
Figure 3.10 Main Menu
m
a
in
_
m
e
n
u
.j
p
g