Mobile Device Wireless and Network Settings
Once the connection to the Mobile Device Server is established, the MX3Plus Enabler attempts to apply all network and
wireless settings contained in the active profile.
The success of the application of settings is dependent upon the local configuration of control parameters for the Enabler.
These local parameters cannot be overridden from the Avalanche MC Console.
The default Enabler adapter control settings are:
l
Manage network settings – enabled
l
Use Avalanche network profile – enabled
l
Manage wireless settings – disabled for Windows CE devices
To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the
Enabler icon
on the desktop.
2. Select
File > Settings
.
3. Select the
Adapters
tab.
4. Choose settings for the
Use Manual Settings
parameter.
5. Choose settings for
Manage Network Settings
,
Manage Wireless Settings
and
Use Avalanche Network Profile
.
6. Click the
OK button
to save the changes.
7.
Reboot
the device.
Preparing a Device for Remote Management
Two additional utilities are necessary for remote management. These utilities are included on CE mobile devices manufactured
after April 2007.
l
The
Remote Management Utility (RMU)
must be installed on all mobile devices first – then you can control mobile
device reboot, storage RAM adjustment, real-time updates and Avalanche Enabler properties. If the RMU is not already
installed on the MX3Plus, see
Using Wavelink Avalanche to Upgrade System Baseline
If in doubt, verify RMU.CE.CAB exists in the \System folder. If the RMU.CE.CAB file is present when the Enabler is
installed, the RMU is also installed.
Important
: If the OS package includes double-byte Asian fonts, the storage RAM property of the RMU must be higher
than the default value (40MB).
If the amount of storage RAM is too low, the Enabler returns a “Mobile unit out of resources” error.
To determine the minimum value required, inspect the RMU.StorageRAM>=
nn
parameter in the Criteria field for the OS
package. Generally, this setting should be approximately 40 MB above the amount of RAM in use on the device for a
standard OS and 50MB above the amount of RAM in use for an OS with Asian fonts.
For example, if after installing all the software, the device shows 5MB in use, this setting should be about 45MB for a
standard OS, 55 MB for an Asian font OS.
l
Use the
Wireless Configuration Application (WCA)
when you want to remotely manage Summit client device. This
utility is downloaded and installed in addition to the Remote Management Utility. The WCA is included when the
Summit radio driver software is updated. The WCA is automatically installed when the radio driver is updated.
If the Remote Management Utility (RMU) is not present on the MX3Plus, see
Using Wavelink Avalanche to Upgrade System
.
5-3
Summary of Contents for MX3PLUS
