Honeywell MultiPro, Manual

Page: 4 / 36

3
3.1 Manual sample draw kit 17
3.1.1 Manual sample draw kit usage 17
3.2 Motorized sample draw pump 18
3.2.1 Starting the motorized sample pump 18
3.2.2 Turning off the pump 19
3.2.3 Pump low flow alarm 19
3.3 Sample draw probe 19
4. C
ALIBRATION
19
4.1 Functional (Bump) testing 20
4.2 Fresh Air/Zero Calibration 21
4.2.1Fresh air/zero calibration failure 21
4.2.2 Forced fresh air / zero calibration 21
4.3 Span Calibration 22
4.3.1Span calibration failure: Toxic and LEL sensors 22
4.3.2Span calibration failure: Oxygen sensors 23
5. M
AINTENANCE
23
5.1 Cleaning 23
5.2 Storage 23
5.3 Batteries 24
5.4 Replacing alkaline batteries 24
5.5 Maintaining Li-Ion battery packs 24
5.5.1Storage guidelines for the Li-Ion versions 24
5.5.2 Charging guidelines for Li-Ion battery 25
5.5.3Charging procedure for Li-Ion battery 25
5.5.4 Charging with the pump attached. 25
5.5.5 Battery troubleshooting 25
5.6 Sensor replacement 25
5.6.1 Sensor replacement (Not Duo-Tox) 25
5.7 Sample probe assembly 26
5.7.1 Changing sample probe filters 27
5.7.2 Changing sample probe tubes (wands) 27
5.8 MultiPro Pump Maintenance 27
5.8.1 Replacing pump filters 27
6. D
IRECT PROGRAMMING
27
6.1 Entering the Advanced Menu 27
6.2 Set options 28
6.3 Set time 28
6.4 Set date 29
6.5 Set alarms 29
6.6 Set cal gas 29
6.7 Set cal due 29
6.8 Set bump test due 29
6.9 Setup accept 30
A
PPENDICES
31
Appendix A Toxic gas measurement – Warning, Danger, STEL and TWA alarms 31
1. Warning and Danger Alarms 31
2. Time Weighted Average (TWA): 31
3. Short Term Exposure Limits (STEL): 31
Appendix B Calibration Frequency Recommendation 33