Honeywell MILLER H500, User Manual

Page: 17 / 184

17
GENERAL INSTRUCTIONS FOR USE
Personal Protective Equipment
FULL BODY HARNESS
Compliant with standard EN 361:2002
1- INTRODUCTION
1-1 IMPORTANT PLEASE NOTE:
You have just acquired Personal Protective Equipment (PPE) and we thank you for
your confidence. Please follow the instructions given here BEFORE EVERY USE
OF THE EQUIPMENT , in order to gain maximum benefit. Failure to follow the
instructions given in this manual may result in serious injury or death.
We recommend that you re-read these instructions from time to time. In addition,
the manufacturer or its representative declines all responsibility in case of any
use, storage method or maintenance carried out in any other manner than that
described in this manual.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY LEAD TO
MALFUNCTIONING OF THE PRODUCT AND BE DETRIMENTAL TO
THE ARREST OF A FALL, THUS RESULTING IN SERIOUS INJURIES
OR DEATH FOR THE USER
IF THE BUYER IS NOT THE END USER, IT IS IMPORTANT THAT
THESE INSTRUCTIONS ARE GIVEN TO THE END USER
In the interests of the user’s safety, if the product is resold outside of the original
destination country, the seller must provide the following information in the lan-
guage habitually used in the country of use:
• maintenance instructions
• instructions for periodical examination;
• instructions concerning repairs;
• additional information required that is specific to the equipment.
1-1 LIST OF PRODUCTS CONCERNED
1-2 CONTACT
Honeywell Fall Protection France SAS
35-37, rue de la Bidauderie
18100 VIERZON CEDEX - France
 IS . PPE . TECHSUPPORT . EUROPE@honeywell.com
 00 800 33 44 28 03
www.honeywellsafety.com
1-3 PRODUCT DESCRIPTION
COMPLIES WITH STANDARD EN 361
Full body harness (made of PES webbings, PA and PES threads, metallic compo-
nents and plastic parts, information about material available on equipment mark-
ing) with or without connectors (Compliant with EN 362).
1-4 COMPATIBILITIES
A full body harness is designed to be used together with other components form-
ing part of personal fall arrest systems (compliant with EN 363).
EN