7-101002-00
5
Honeywell Access Systems
LANSRLU1
Programming
DeviceInstaller
The user can manually assign the IP address using the DeviceInstaller, which is
on the product Lantronix CD.
Install the DeviceInstaller
1.
Insert the product CD into your CD-ROM drive. The Lantronix UDS100
Device Server window displays.
If the CD does not launch automatically:
a.
Click the Start button on the Task Bar and select Run.
b.
Enter your CD drive letter, colon, backslash, and deviceinstaller.exe
(e.g., E:\deviceinstaller.exe).
2.
Click the DeviceInstaller button. The installation wizard window displays.
3.
Respond to the installation wizard prompts. (When prompted to select an
installation type, select Typical.)
Assign IP Address and Network Class
1.
Click the Start button on the task
bar and select Programs Device–
Installer DeviceInstaller. The
DeviceInstaller window appears.
2.
Observe the menu bar and tool
bar. Select
on the tool bar in
order to assign a New IP Address.
A dialogue box will appear
prompting that an Ethernet
(MAC) Address and the desired
IP Address be entered.
3.
Enter in the MAC Address and
the IP Address of the UDS100
device.
Note that the appropriate Subnet
Mask is required at this point.