Honeywell IQ Force Reference Manual Download Page 12

Page: 12 / 60

IQ Force™ Dock Reference Manual

IQ Administrator Pro and PostgreSQL Database Server Installation

If connecting the dock to the PC via USB, follow the instructions in

Section 2.6

. If connecting the dock via Ethernet, follow the Ethernet

Instruc tion booklet.

Follow the instructions in

Section 2.7

for providing calibration gas

and fresh air to the dock(s).

For docks that will be connected permanently by USB port, configure

the docks by connecting them to the PC’s USB port. If the instrument

is to be connected via Ethernet, follow the Ethernet Instructions that

came with the dock.

2.2 IQ Administrator Pro and PostgreSQL
Database Server Installation

The IQ Administrator Pro software and PostgreSQL Database Server are

contained on the IQ Force installation CD. Place the CD in your PC’s CD

tray and follow the installation instructions given in the IQ Administrator Pro

and Postgre SQL Reference Manual that is included with the dock.

2.3 IQ Database Manager Software Installa-
tion

The Database Manager Pro Program is contained on the IQ Force

Installation Disc. Place the disc in your PC’s CD tray and follow the

installation instructions given in the IQ Database Manager Software manual

that is included with the IQ Force.

2.4 IQ Force Dock Desktop Software Instal-
lation

The PostgreSQL Database Server and IQ Database Manager Pro Programs

should be installed before proceeding to step 1.

NOTE

Screens shown below may be slightly different depending
on your PC’s operating system.

The Software Installation screen should come up automatically once

the installation of Database Manager is complete. If this screen

does not come up, access the CD drive using Windows Explorer.

Summary of Contents for IQ Force




























































Search results

Summary of Contents for IQ Force

Reviews:

Brands by name

Popular brands

Honeywell IQ Force, Reference Manual

Search results

Summary of Contents for IQ Force

Reviews:

Brands by name

Popular brands